Water Sprinkler Trucks
Dongfeng 7.36T 4x2 Water Sprinkler Truck with 3.87 m³ Tank
This Dongfeng 4x2 sprinkler truck is configured around a 3.87 m³ water tank for municipal road wetting, landscape irrigation and controlled dust suppression on paved or suitably firm routes. Front flushing, side spraying, rear sprinkling and a rear water cannon are listed; the final pump, nozzle layout and permitted water load require project confirmation.
Product gallery
Technical specifications
| Water tank capacity | 3.87 m³ water tank |
|---|---|
| Chassis brand | Dongfeng |
| Drive layout | 4x2 |
| Fuel type | Diesel |
| Transmission | Manual transmission with PTO |
| Wheelbase | 3308 mm |
| Gross vehicle weight | 7360 kg |
| Overall width | 2000 mm |
| Overall height | 2800 mm |
| Spray functions | Front flushing, Side spraying, Rear sprinkling, Rear water cannon |
Confirm permitted water load, pump flow and nozzle settings in the signed configuration. Road distance or area per fill cannot be estimated without flow and application-rate data.
For a project quotation, specify the destination, road conditions, water source, daily route and required spray functions. The 3.87 m³ figure describes the listed tank; permitted fill and road coverage depend on the final chassis, pump, nozzles and application rate.
Core capabilities
Compact water delivery
3.87 m³ tank
Tank volume supports planned road wetting and irrigation; legal fill must follow the signed weight statement
Conditions: No road coverage estimate without pump and nozzle flow data
Multiple spray positions
Front, side and rear spraying plus rear cannon
Allows configuration for road and landscape tasks
Conditions: Actual reach depends on pump, nozzle, wind and water pressure
Applications and operating fit
Municipal road wetting, landscape irrigation and dust control on paved or suitably firm routes.
Suitable conditions
- Paved urban streets
- Landscape irrigation routes
- Firm construction-site access
Conditions requiring a different specification
- Potable water service without a specified approved tank
- Firefighting without a certified fire package
- Loads above legal axle or gross limits
- Severe off-road terrain without a suitable chassis
Chassis and configuration
| Front suspension | Multi-leaf spring |
|---|---|
| Rear suspension | Multi-leaf spring |
| Cab seating | 2 persons |
| Tyre options | 7.00R16LT 14PR / 7.50R16LT 16PR |
Configuration choices
- Engine, tyre and tank configuration affect vehicle weight and route suitability; one combination must be fixed in the signed build sheet.
Frequently asked questions
What is the listed water tank capacity?
The listed water tank capacity is 3.87 m³. Permitted fill volume depends on the selected chassis, axle loads and destination weight limits.
Which spraying functions are described?
Front flushing, side spraying, rear sprinkling and a rear water cannon are listed functions. Confirm the pump and nozzle configuration in the final technical drawing.
Can one fill be translated into a road distance?
A reliable distance estimate needs the pump flow, active nozzles, application rate and route conditions. Those inputs are not confirmed for this listing, so no distance is promised.
What should a buyer provide for a quotation?
Provide the destination country, road and site conditions, water source, daily route, required spray functions, drive side, emission requirement and quantity.
Plan a project quotation
Information to provide
- Destination country and port
- Water source and water quality
- Road and site conditions
- Daily route length
- Spray functions and application rate
- Drive side
- Emission requirement
- Quantity
Checks before quotation
- One confirmed chassis and engine
- Approved tank and spray-system drawing
- Axle and gross weight calculation
- Pump and nozzle flow data
- Destination document list